3 Steps To Propagate Jade Satin Pothos -Backyardprime (2023)

Jade Satin Pothos is a beautiful and easy-to-care-for houseplant that adds luscious greenery to any room and makes it pop with color. They are also relatively easy to propagate, so if you are looking for a fun and easy project to take on, this is it! We’ll go over everything you need to know, from selecting a cutting to potting it up. By the end of this guide, you’ll be able to propagate Jade satin Pothos on your own.


About the Jade Satin Pothos

The jade satin pothos plant is native to Southeast Asia and belongs to the Araceae family of plants. It is a hardy plant that can tolerate low light conditions and occasional periods of neglect and loves warm temperatures. This makes it a great choice for busy households or anyone who is not a very great plant parent.

The jade satin pothos gets its name from its glossy, green leaves which have a satin-like sheen to them. This plant is a fast grower and can quickly reach up to 6 feet in length if left unchecked. However, pruning back the stems will keep the plant more compact and manageable.

This plant is not toxic to pets (as long as it is not ingested), making it asafe choice for homes with furry friends.It is also a great way to improve the quality of indoor air and purify it from allergens.

Are you looking for other houseplants to grow indoors check out our detailed guide togrowing and caring for Monstera Thai Constellation

What Tools You’ll Need for Satin Pothos Propagation?

Propagating a Jade Satin Pothos is a simple process that can be done with just a few supplies. Whether you prefer water propagation or doing it in soil, we’ll show you the toolkit and step-by-step instructions for each method.

If you want to propagate Jade satin pothos plant in the water you will need:

  • a plastic bag
  • a glass or clear plastic container
  • water.

To propagate Jade Satin Pothos in the soil you will need:

  • a small bucket of moistened well-draining potting soil
  • a plastic bag, a clean, sharp knife, or pruning shears
  • something to support the stem while it is rooting
  • rooting hormone.

How To Propagate Jade Satin Pothos?

There are different ways to propagate Jade Satin Pothos. By carefully following the right instructions, you will master the process in no time. Here are a few methods for easy propagation of the plant:

Jade Satin PothosPropagation in Water

To propagate a Jade Satin Pothos in water, first cut a 4-6 inch piece of stem from a healthy mother plant, making sure to include at least 2 leaf nodes.

Next, remove the lower leaves from the stem, and place the stem in a glass or jar of water. Make sure that the water level is high enough to cover the leaf nodes.

Place the glass or jar in a bright, indirect light location, and wait for new roots to form. Once the roots are 1-2 inches long, you can transplant the Jade Satin Pothos into a pot filled with fresh potting mix.

Jade Satin PothosPropagation in Soil from Stem Cuttings

To propagate Jade Satin Pothos in soil:

  • First, take a cutting that is at least 6 inches long from a healthy stem.
  • Next, remove the bottom leaves from the cutting, and then dip the cut end of the stem into some rooting hormone.
  • Once the stem is coated with the substance, plant the cutting in a pot filled with moistened, well-draining potting mix. Be sure to bury at least 2 inches of the stem in the potting mix.
  • Water the potting mix well, and then place the pot in a warm, bright location. Keep the potting mix moist, but not soggy, and in 4-6 weeks, roots should form and new growth should appear.

Which propagation method is the best?

There is no definitive answer to this question as different methods work better for different people. Some people find that propagating jade satin pothos in water is the best method, while others find that propagating in the soil is more convenient. Ultimately, it is up to the individual to experiment with different methods and see what works best for them.

Common problems when propagating a Jade Satin Pothos plant

Even though they’re relatively low-maintenance, there are still a few common problems that can occur when propagating jade satin pothos plants. In this part, we’ll go over some of the most common troubles you might encounter and how to fix them.

Satin Pothos Cutting not Growing any Roots

One possible reason why a Satin Pothos cutting may not be growing any roots is that the stem cutting was not taken from a healthy plant. Another possibility is that the cutting was not placed in a proper rooting environment, such as a pot with overly moist soil. If the cutting does not have any leaves, it may also be difficult for it to photosynthesize and produce the energy it needs to grow roots.

You should detect the root of the problem and treat the plant accordingly to avoid its recurrence.

Satin Pothos Cutting turning Brown

If your Satin Pothos cutting is turning brown, it is likely due to excess moisture or too little water. When propagating, it is important to keep the cutting moist, but not soggy. As it could lead to root rot. Allow the top inch of soil to dry out between waterings. If the cutting is in a pot with no drainage holes, be sure to check the bottom of the pot for standing water.

The new Jade Satin Pothos Leaves on the Cutting is Small

This is not necessarily a problem. The new Jade Satin Pothos leaves on the cutting are small when propagating because the plant is still young and growing. So you may rest assured. The leaves will eventually grow larger as the plant matures.

Satin Pothos Cutting turning Yellow

One of the most common reasons for the plant’s cutting turning yellow is simply due to too much water. Over-watering is a common mistake when propagating plants, as people often think that more water will help the plant grow faster. However, too much water can actually drown the plant and cause the leaves to turn yellow and fall off. If you think your plant is over-watered, try letting the soil dry out completely before watering again.

Another common reason for yellow cuttings is poor soil quality and lack of nutrients. If the soil you’re using doesn’t have enough nutrients, the plant will start to yellow as it tries to search for food. Try adding some organic matter to the soil, such as compost or manure, to help give the plant the soil nutrients it needs.

Leaf Drop

There are a few reasons why your jade satin pothos leaves might be dropping during propagation. Leaf drops can be caused by too much or too little water, improper lighting, or pests.

  • If the leaves are not getting enough water, make sure to keep the soil moist, but not soggy.
  • If the leaves are exposed to too much direct sunlight, it may burn them and eventually make them fall off. Try moving your plant to a location with indirect light.
  • Finally, the leaves could be dropping due to stress from the propagation process. Try to reduce the amount of stress on your plant by using a method of propagation that is less stressful.


Frequently asked questions regarding the propagation of the jade satin pothos plant:

What is the Best Season to Propagate Jade Satin Pothos plants?

The best season to propagate a satin pothos plant is during its growing season which is spring or early summer. This is because the plant will have the most energy and be able to put out new growth.

Should you use a Rooting Hormone on your Satin Pothos Cuttings?

A rooting hormone can help to encourage root growth in satin pothos cuttings. It is unnecessary but may help cuttings take root more quickly.

Can You Propagate Jade Satin Pothos from a Single Leaf?

Yes, you can propagate a satin pothos from a single leaf. To do this, cut a leaf off of the plant and place it in a cup of water. Change the water every few days, and within a few weeks, you should see roots growing from the leaf. Once the roots are a few inches long, you can plant the leaf in a pot of soil.

How many Propagation Methods are there for Jade Satin Pothos?

There are four propagation methods for Jade Satin Pothos: stem cuttings, leaf cuttings, air layering, and water propagation.

What are the benefits of Propagating Jade Satin Pothos?

Propagating Jade Satin Pothos is a great way to create more plants for free, as well as to provide new plants for friends and family. It is also a great way to ensure that your plants remain healthy and vigorous.

Can my Jade Satin Pothos’ Cutting get attacked by pests during Propagation?

There is always a possibility that your Jade Satin Pothos’ Cutting could be attacked by pests during propagation, but it is not common. If you do notice any pests, you should take action immediately to treat the problem.

Top Articles
Latest Posts
Article information

Author: Allyn Kozey

Last Updated: 02/14/2023

Views: 6263

Rating: 4.2 / 5 (43 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Allyn Kozey

Birthday: 1993-12-21

Address: Suite 454 40343 Larson Union, Port Melia, TX 16164

Phone: +2456904400762

Job: Investor Administrator

Hobby: Sketching, Puzzles, Pet, Mountaineering, Skydiving, Dowsing, Sports

Introduction: My name is Allyn Kozey, I am a outstanding, colorful, adventurous, encouraging, zealous, tender, helpful person who loves writing and wants to share my knowledge and understanding with you.